General Cleaning Instructions; Emptying The System; Cleaning - Jura IMPRESSA 401 Instructions For Use Manual

13.7 General cleaning instructions

Never use abrasive articles or corrosive chemicals to clean your
machine
Wipe off the inside and outside of the casing with a soft, damp
cloth.
Clean the pivoting nozzle after each use.
After heating milk, draw off a little hot water, in order to clean
the inside of the pivoting nozzle.
You can take off the frothing nozzle for a thorough cleaning.
The water tank should be rinsed and filled with fresh water
every day.
If you see any visible scaling in the water tank, you can
remove it with a customary de-scaling agent. Remove the
tank from the machine for this purpose.
If a Claris filter cartridge is used, it must be removed first.

13.8 Emptying the system

This process is necessary in order to protect the machine
against damage from frost in transportation.
Switch your machine off with the ON/OFF
Place a sufficiently sized container under the pivoting nozzle for
hot water/steam (18).
Turn the selector key for coffee or hot water/steam (17) to
position .
Switch your machine on with the ON/OFF
symbol flashes and the symbol
Press the selector key until only the symbol
a short time, steam comes out.
14
switch.
switch. The
lights up.
flashes. After
The drawing-off of steam stops automatically. Turn the selector
key for coffee or hot water/steam (17) back to position

14. Cleaning

The machine has an integrated cleaning programme. The proce-
dure takes about 15 min.
If the machine needs cleaning, the symbol
can continue to draw off coffee or hot water/steam and carry
out the cleaning programme at a later stage.
Please only use Jura cleaning tablets, which you can obtain
from your dealer.
Once the cleaning process has started, it must not be inter-
rupted.
Switch the machine on with the ON/OFF
Open the cover for special functions (3) and press the key
for about 3 seconds. The symbol
, light up. If the symbol
water tank.
Empty the drip tray (1) and the coffee grounds container (20)
and put them back in again.
Put a sufficiently large vessel under the height-adjustable coffee
spout (14).
Now put a Jura cleaning tablet into the pre-ground coffee pow-
der filling funnel (13) (Fig 8).
Press the key . The symbols
cleaning procedure now starts.
If the symbol lights up, empty the tray and press the key
once more. The cleaning process is continued.
When the cleaning process has been completed, the symbol
lights up. Now empty the drip tray (1) and the coffee grounds
container (20) and put them back in again.
.
lights up. You
switch.
flashes, the symbols ,
lights up, pour water into the
and flash. The automatic