Safety Precautions; Check Before Use; Checking Mains Voltage; Checking Fuse - Jura IMPRESSA X30 Instructions For Use Manual

Table of Contents

Advertisement

Never use a faulty machine or one with a damaged power cable.
Never immerse the machine in water.

2.2 Safety precautions

Never expose the machine to the effects of rain, snow or frost
and never operate it with wet hands.
Place your espresso/coffee machine on a solid level surface.
Never leave it on a surface that is warm or hot (hob etc.).
Choose a location that is inaccessible for children or pets.
Remove plug from power socket if an absence for a longer
period of time (holidays etc.) is planned.
Always remove plug from power socket before cleaning.
When removing plug from power socket, never tug on the cord
or on the machine itself.
Never repair or open the machine yourself. All repairs should be
performed only by authorised service centres using original Jura
spare parts and accessories.
The machine is connected to the mains power socket via an
electric cable. Ensure that no one trips over this cable and
pulls down the machine. Keep children and animals away.
Never put the machine or even parts of it in the dishwasher.
To prevent overheating put the machine in an airy place.
If you are using an acid-based descaling agent, it is important to
avoid any splashed or drips on sensitive kitchen surfaces, parti-
cularly those in natural stone or wood. If they do occur, they
should be removed immediately.

3. Check before use

3.1 Checking mains voltage

The machine is set for the correct voltage before leaving our
factory. Ensure that your mains voltage corresponds to the details
quoted on the rating plate attached to the bottom of the machine.

3.2 Checking fuse

The machine is designed for a current of 10 amps. Check that an
appropriate fuse is fitted.

3.3 Filling water tank

Remove water tank and rinse well with cold clean tap water.
Fill the tank and replace it in the machine. Ensure that the tank
clicks correctly into place.
Use only clean cold water. Never fill the tank with milk,
mineral water or any other liquid. You can also top the tank
up with water without removing it from the machine. Simply
pull up cover and pour water into the tank from above. Put
cover back in its original position.

3.4 Adding coffee beans

Lift up the cover of the bean container (11) and remove the
aroma-protection lid.
Clean out any dirt or alien elements from the bean container.
Fill the bean container with coffee beans, put the aroma-protec-
tion lid back on and close the cover.

3.5 Caramelised coffee beans

Please remember that the grinder of your Jura coffee ma-
chine is not suited for coffee beans which have been treated
with additives (e.g. sugar) during or after roasting. Using
such coffee mixtures can lead to damage to the grinder.
E
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Impressa scala varioImpressa scalaImpressa m30

Table of Contents