I Cloning Function - Icom IC-E91 Instruction Manual

12
OTHER FUNCTIONS

I Cloning function

The IC-E91 has transceiver-to-transceiver data cloning capa-
bility. This function is useful when you want to copy all of the
programmed contents from one IC-E91 to another.
• An optional OPC-474
q Turn the transceiver's power OFF, then connect an op-
tional OPC-474 between both [SP] jacks.
w While pushing [MR] and [MENU/LOCK], push and hold
[PWR] for 1 sec. to enter cloning mode.
• "CLONE M" appears.
e Push [PTT] on the "master" transceiver.
• "CLONE OUT M" appears and the bar meter shows that cloning
is taking place.
• After the cloning is completed, the display returns to "CLONE M."
r Push and hold [PWR] for 1 sec. to turn power OFF.
to the [SP] jack
116
is required.
CLONING CABLE
OPC-474
to the [SP] jack
The optional RS-91
REMOTE CONTROL SOFTWARE
available to clone/edit contents with a PC (for Microsoft
®
dows 98/98SE/ME/2000XP) and using ICF format files.
® ®
Microsoft and Windows are registered trademarks of Microsoft Corporation in
the U.S.A. and other countries.
is also
®
Win-