Gps Auto Tx Timer; Call Sign Edit Record - Icom IC-92AD Instruction Manual

12
MENU SCREEN OPERATION
D GPS auto TX timer
Selects the desired interval for automatic position transmis-
sion function from OFF (default), 5, 10, 30 second, 1, 3, 5,
10 and 30 minutes.
GPS AUTO TX GPS AUTO TX
r
OFF OFF
5SEC 5SEC
10SEC 10SEC
30SEC 30SEC
1MIN 1MIN
NOTE: When 4th GPS sentence are selected at "GPS
SENTENCE" (pgs. 102, 103), "5SEC" can not be se-
lected.
D DV auto detect
When a signal other than DV mode is received during DV
mode operation, the transceiver has capability of automatic
FM mode selection.
• OFF : Operating mode is fi xed in DV.
• ON : The transceiver automatically selects FM
mode for temporary operation.
DV AUTO DETECT DV AUTO DETECT
r
OFF OFF
ON ON
106
GPS AUTO TX GPS AUTO TX
OFF OFF
5SEC 5SEC
10SEC 10SEC
r
30SEC 30SEC
1MIN 1MIN
(default)
DV AUTO DETECT DV AUTO DETECT
OFF OFF
r
ON ON
D Call sign edit record
Selects call sign programming when the call sign is edited or
corrected with the pre-programmed call sign.
• OFF : The edited or corrected call sign is over writ-
ten.
• SELECT : The edited or corrected call sign is pro-
grammed into the selected call sign memory.
• AUTO : The edited or corrected call sign is pro-
grammed into a blank channel automatically.
(default)
EDIT RECORD EDIT RECORD
OFF OFF
SELECT SELECT
r
AUTO AUTO
[DIAL] ↔ [ ](2)/[ ](8)
†
EDIT RECORD EDIT RECORD
OFF OFF
r
SELECT SELECT
AUTO AUTO
](5) ↔ [ ](6)
‡
[