Basic Operation - Icom IC-M71 Instruction Manual

D D Channel name/comment programming
q Push [Y Y ]/[Z Z ] to select a channel to
program.
• Push and hold [DIAL] for 1 sec. to select
a channel group, if necessary.
w While pushing and holding [
push [DIAL].
• The 1st character of the currently pro-
grammed name or comment blinks.
e Push [Y Y ]/[Z Z ] to select a character.
r Push [H/L•LOCK] to move to the
right; then push [Y Y ]/[Z Z ] to select a
character.
• Pushing [16•C], moves to left
t Continue until the desired characters
have been selected, then push
[DIAL] to return to normal operation.
],
D D Opening comment programming
q While
pushing and
[SCAN•DUAL], turn power ON.
• "OC" is displayed and the 1st character
of the currently programmed comment
blinks.
w Push [Y Y ]/[Z Z ] to select a character.
• Push [SCAN•DUAL] to clears the previ-
ously programmed opening comment
(all digits).
e Push [H/L•LOCK] to move to the
right; then push [Y Y ]/[Z Z ] to select a
character.
• Pushing [16•C], moves to left
r Continue until the desired characters
have been selected, then push
[DIAL] to return to normal operation.
The programmed opening comment is briefly displayed or
scrolled when the transceiver is powered ON.
However, the opening comment indication can be skipped
by pushing [16•C].

BASIC OPERATION

holding
4
4
13