Set Mode; I Set Mode Programming - Icom IC-M71 Instruction Manual

I SET mode programming

SET mode is used to change the condition of 17 transceiver
functions: beep tone function, scan type, scan resume timer,
auto scan function, dual/tri-watch function, monitor key action,
backlighting function, LCD contrast selection, auto power
save function, self check function, battery voltage indication,
squelch sensitivity, channel name scroll type, scroll speed,
scrambler code, VOX gain and VOX delay.
D SET MODE ITEMS
Beep tone* Scan type
VOX delay
VOX gain
Voice scrambler
†
code
Scroll speed
‡ Scan resume timer
: Push [ ], or while pushing and holding [
: While pushing and holding [
*Starting item
†
Availability may differ according to versions.
‡
Not available with Dutch versions.
Channel name scroll type Squelch sensitivity

SET MODE

D SET mode operation
q Turn power OFF.
w While pushing and holding [
the SET mode.
• "BEEP" (Beep tone function setting) appears.
e Push [
], or push [
sired item.
r Push [Y Y ]/[Z Z ] to select the desired condition of the item.
t To exit the SET mode, push [16•C].
‡ Auto scan start function
Monitor key
], push [Y]
], push [Z]
Power save
Battery voltage indication
7
], turn power ON to enter
]] and [Y Y ]/[Z Z ] to select the de-
‡ Dual/Tri-watch ‡
action
Display
backlight
LCD
contrast
function
Self-check function
6
7
17