Set Mode - Icom IC-M87 Instruction Manual

8

SET MODE

D Battery voltage indicator "bt"
This function contains display or non-display settings of the
voltage of the connected battery pack when the power is ON.
• The voltage of the connected battery pack is displayed for 2 sec.
after power is turned ON.
Battery voltage OFF
(default)
21
PUSH
Battery voltage ON
SET MODE LIST
Function
Beep tone function
Priority scan function
Scan resume timer
Auto scan function
Dual/Tri-watch function
Monitor switch action
Automatic backlighting
LCD contrast selection
Auto power save function
Self check function
Battery voltage indicator
* default setting
Indication Switch
"bP" OFF / ON* / US
"Pr" OFF* / ON
"St" OFF* / ON
"AS" OFF* / ON
"dt" Dual* / Tri
"Sq" Push* / Hold
"bL" OFF / 1 / 2 / 3*
"LC" 1 / 2 / 3* / 4
"PS" OFF / ON*
"SC" OFF* / ON
"bt" OFF* / ON