I Call Channel Programming - Icom IC-M87 Instruction Manual

I Call channel programming

The call channel key is used to select the default channel,
however, you can program your most often-used channel in
each channel group for quick recall.
q Push [DIAL] for 1 sec. several
times to select the desired chan-
nel group (INT, USA) to be pro-
grammed.
w Push [16•
] for 1 sec. to select
C
the call channel.
• "CALL" and call channel number
appear.
e Push [16•
] again for 3 sec.
C
(until a long beep changes to 2
short beeps) to enter call chan-
nel programming condition.
• Call channel number to be pro-
grammed flashes.
r Push [Y]/[Z] to select the de-
sired channel.
t Push [16•
] to program the dis-
C
played channel as the call chan-
nel.
• The call channel number stop
flashing.
4
BASIC OPERATION
12