Set Mode; I Set Mode Programming; D Set Mode Operation - Icom IC-M90E Instruction Manual

I SET mode programming

SET mode is used to change the condition of 16 transceiver
functions: beep tone function, priority scan function, scan re-
sume timer, auto scan function, dual/tri-watch function, moni-
tor switch action, backlighting function, LCD contrast selec-
tion, auto power save function, self check function, battery
voltage indicator, signal strength indicator, squelch sensitiv-
ity, scrambler code, VOX gain and VOX delay.
D SET MODE ITEMS The displays show the default settings, and the selected item is displayed in the dotted circle.
VOX gain VOX delay
Scrambler code
Squelch sensitivity
Signal strength
Battery voltage
indicator

D SET mode operation

q Turn power OFF.
w While pushing [SQL•

SET mode.

• "bp" (Beep tone function setting) appears.
e Push [SQL•
desired item, if necessary.
r Push [Y]/[Z] to select the desired condition of the item.
t Push [16•
Beep tone Priority scan
Starting item
Push and
: Push
: Push and
Self check Power save
SET MODE
], turn power ON to enter the
MONI
] or [SQL• ] and [Y]/[Z] to select the
MONI MONI
] to exit the SET mode.
C
Scan resume timer
LCD contrast
8
7
8
Auto scan
Dual/Tri-watch
Monitor switch
Backlighting
16