Table of Contents
Advertisement
D Battery voltage indicator "bt"
This function controls display or non-display settings of the
connected battery pack's voltage when the power is ON.
• The voltage of the connected battery pack is displayed for 2 sec.
after power is turned ON.
Push
Battery voltage
indication OFF (default)
D Signal strength indicator "Sl"
The signal strength indicator displays received signal strength
as "S-meter." This function is convenient to check the signal
strength visually.
• The strength is displayed at 4 steps.
• The antenna mark and 3 bars appear when receiving strong signals.
• The antenna mark only appears when receiving no signal.
Push
Signal strength indication OFF
(default)
Battery voltage
indication ON
Signal strength indication ON
D Squelch sensitivity function "SS"
When this function is turned ON, blocking against noise is im-
proved. Therefore the squelch is not easily affected by noise.
Push
Squelch sensitivity OFF
(default)
D Scrambler code "cd"
There are 32 codes (1 to 32) available for programming. In
order to understand each other, all transceivers in your group
must share the same scrambler code.
Push
Scrambler code 1 (default)
8
SET MODE
Squelch sensitivity ON
Scrambler code 32
8
20
Advertisement
Table of Contents
