Optional Swivel Belt Clip; I Mb-86 Contents; I Attachment; I Detachment - Icom IC-M90E Instruction Manual

I MB-86 contents

Belt clip .................................................................. 1
Base clip ............................................................... 1
Supplied screws ...................................................... 2

I Attachment

q Screw the base clip to the back of the transceiver using
the two screws (supplied), as shown below.
Supplied screws
w Clip the belt clip over your belt and insert the transceiver.

OPTIONAL SWIVEL BELT CLIP

e Once the transceiver is locked in place, it swivels as illus-
trated below.
Qty.

I Detachment

➥
Turn the transceiver upside down in the direction of the
arrow and pull out from the belt clip.
R CAUTION!
HOLD THE TRANSCEIVER TIGHTLY, WHEN HANGING
OR DETACHING THE TRANSCEIVER FROM THE BELT
CLIP.
Otherwise the transceiver may not be attached to the belt
clip or swivelled properly if the transceiver is accidentally
dropped and the base clip is scratched or damaged.
10
9
10
26