Scan Operation; I Scan Types - Icom IC-M90E Instruction Manual

I Scan types

Scanning is an efficient way to quickly locate signals over a
wide frequency range. The transceiver has a priority scan set-
ting and normal scan setting.
In addition, the "Auto scan" function is available for scanning.
This function can be activated simultaneously, depending on
the settings on the SET mode. (p. 17)
PRIORITY SCAN
CH 01
CH88 CH 16
CH 05
Priority scan searches through all tag channels in sequence
while monitoring Channel 16. When a signal is detected on
Channel 16, scan pauses until the signal disappears; when
a signal is detected on a channel other than Channel 16,
scan becomes dualwatch until the signal disappears.
CH 02
CH 03
CH 04

SCAN OPERATION

Set the tag channels (scanned channel) before scanning.
Clear those tag channels which are not needed or inconve-
niently stop scanning, such as digital communications.
Choose priority or normal scan on the SET mode. (p. 17)
NORMAL SCAN
CH 01
CH88
CH 05
Normal scan, like priority scan, searches through all tag
channels in sequence. However, unlike priority scan, Chan-
nel 16 is not checked unless Channel 16 is set as a tag
channel.
5
CH 02
CH 03
CH 04
4
5
12