I Set Mode Items - Icom IC-M90E Instruction Manual

8
SET MODE

I SET mode items

D Beep tone function "bP"
You can select silent operation by turning the beep tones
OFF, or you can have 2 types of confirmation beeps sound at
the push of a key. When "ON" is selected, a fixed beep (Pi)
sounds, and when "US" is selected, the preset beeps (e.g.
do, re, mi) sound.
• Beep tone synchronizes with the volume level.
• The beeps sound during call channel programming even if this func-
tion is turned OFF.
Beep tone ON (default)
D Priority scan function "Pr"
The transceiver has 2 scan types—normal (OFF) and priority
(ON) scans. Normal scan searches all tag channels in the se-
lected channel group. Priority scan searches all tag channels
in sequence while monitoring Channel 16.
Normal scan (default)
17
Push
Beep tone OFF
Push
Priority scan
D Scan resume timer "St"
The scan resume timer can be set as a pause (OFF) or timer
scan (ON). When OFF is selected, the scan pauses until a
received signal disappears. When ON is selected, the scan
pauses for 5 sec. after receiving a signal and then resumes
even if the signal has been received.
Scan resume timer
OFF (default)
D Auto scan function "AS"
The Auto scan function starts the desired scan automatically
when no signal is received, and no operation is performed for
30 sec.
Auto scan OFF (default)
Push
Scan resume timer ON
Push
Auto scan ON