Display Bezel - HP OMEN 15-ce100 Maintenance And Service Manual

Display bezel

Description
Display bezel
IMPORTANT:
and replacement
Before removing the display bezel, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
a. Hinge covers (see
b. System support brackets (see
c. Fans (see
d. Heat sink (see
e. System board (see
f. Display assembly (see
Remove the display bezel:
1. Using a case utility tool, carefully separate the bezel from the top of the display assembly (1).
2. Separate the bezel from the sides of the display assembly (2).
3. Separate the bezel from the bottom of the display assembly (3).
IMPORTANT:
bottom of the display panel assembly.
66 Chapter 6 Removal and replacement procedures for authorized service provider parts
Make special note of each screw and screw lock size and location during removal
Battery on page
Hinge covers on page
Fans on page 49).
Heat sink on page
System board on page
Display assembly on page
To avoid damaging the display panel, use care when separating the bezel from the
36), and then remove the following components:
45).
System support brackets on page
53).
58).
61).
Spare part number
929444-001
46).