• Scanning starts from the lowest to highest channel and
stops when it finds an active channel. It remains on
that channel until the transmission ends, then resumes
scanning after a 2 second delay period.
• When in the scan mode, the unit automatically activates
the Triple Watch feature. To deactivate Triple Watch
from the scanning mode, press and hold
seconds. TRIPLE disappears from the display
Transmission power can be set to 3.5W or
change. The HIGH or LO indicator on the
To transmit, press and hold
To return to receive, release
• If you press
blinking and the transmission ends. The TX time out tone
sounds when you release
• If the battery indicator Level 0 is flashing when you press
(see page 6)
Lighted Keys and Display
To light the display, press any key except
If you press any key except
illuminated, they remain illuminated for 10 seconds.
to make the
, the radio will not transmit and the TX icon flashes.
(push-to-talk). TX appears on the
. TX disappears.
for more than 3 minutes, TX starts
while the display and keypad are