Programming.a.channel.into.memory; Deleting.a.channel.from.memory; Scanning - Uniden Atlantis 200 Owner's Manual

1. To listen to Canadian marine channels,
press the uIC button once. CAN appears
on the display. To listen to United States
marine channels, press the uIC button
again. US appears on the display.
2. The radio will keep the last mode setting that was selected when
turned back on.
3. For USA, International, and Canadian
marine channels and functions, refer to
the tables starting on page 19.
Programming a Channel into Memory
Before scanning, you must have channels programmed in memory.
Press ▲ or ▼ to select a channel.
1.
MEM
2. Press
MEM appears on the display.
Deleting a Channel from Memory
Press ▲ or ▼ to select a channel.
1.
MEM
2. Press the

Scanning

1. To begin scanning the programmed
channels, press
appear.
2. To stop scanning, press
SCAN and TRIPLE disappear from the display.
to store the channel.
button. MEM disappears.
sCaN
. SCAN and TRIPLE
sCaN
again.
HIGH
HIGH
HIGH
HIGH
HIGH
13