Programming.a.channel.into.memory; Deleting.a.channel.from.memory; Scanning - Uniden ATLANTIS 200 Owner's Manual

1. To listen to International marine channels,
press the uIC button. INT
appears on the display. To listen to
Canadian marine channels,
press the uIC button again. CAN
appears on the display.
2. The radio will keep the last mode
setting that was selected when
turned back on.
3. For USA, International, and Canadian
marine channels and functions, refer to
the tables starting on page 18.
Programming a Channel into Memory
Before scanning, you must have channels
programmed in memory.
1. Press ▲ or ▼ to select a channel.
2. Press MEM to store the channel.
MEM appears on the display.
You cannot program Channel 70 or any of the weather
channels into memory.
NOTE
Deleting a Channel from Memory
Press ▲ or ▼ to select a channel.
1.
MEM
2. Press the

Scanning

1. To begin scanning the programmed
channels, press sCaN . SCAN and
TRIPLE appear.
2. To stop scanning, press sCaN again.
SCAN and TRIPLE disappear
from the display.
button. MEM disappears.
HIGH
INT
HIGH
CAN
HIGH
US
MEM
HIGH
US
HIGH
US
MEM SCAN
TRIPLE
E-13