Moving The Liebert Xdp Using Piano Jacks; Figure 5 Removing The Unit From The Skid Using Rigging - Emerson Liebert XDP User Manual

Figure 5 Removing the unit from the skid using rigging
Cushioning material
not shown for clarity.
If rigging will be used
to transport the
Liebert XDP, place one
or two horizontal
straps around the unit
and the vertical staps
about this height.
1.3.5

Moving the Liebert XDP Using Piano Jacks

1. Elevate the Liebert XDP with a lifting mechanism, such as a forklift or rigging.
2. Position one piano jack at each end of the Liebert XDP.
3. Lower the unit to a height suitable for placing it on the piano jacks.
4. Put protective material between the Liebert XDP and the piano jacks and straps.
5. Secure the Liebert XDP to the piano jacks.
6. Release the the Liebert XDP from the straps securing it to the lifting mechanism and move the
mechanism away from the unit.
Using the piano jacks, at least two properly trained and qualified personnel can move the unit.
Equally Equally
Spaced Spaced
Center of
Gravity
Symbols
Lag
Bolts
7
Product Description
Spreader
Bars
Bracket