Table of Contents
Advertisement
Section 1: Installation of the Transmitter Batteries
Install 8 "AA" alkaline batteries into the
transmitter, following the instructions provided
for your radio system.
Section 2: Installation of the 7.2V Ni-Cd Battery Pack
Turn on your transmitter, making sure the radio
is in neutral. Carefully remove the hatch (scale
pilot cockpit).
Install a fully charged 7.2V Ni-Cd battery pack into
the radio box. Follow the instructions included with
your fast charger to ensure a safe charge. Plug the
battery into the female battery connector attached
to the electronic speed controller.
Advertisement
Table of Contents
