Before First Use - Electrolux ESF2210DW User Manual

6. BEFORE FIRST USE

1. Make sure that the set level of the wa-
ter softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
2. Fill the salt container.
6.1 Adjusting the water softener
German
degrees
(°dH)
> 24
22 - 24
20 - 22
18 - 20
16 - 18
13 - 16
10 - 13
7 - 10
4 - 7
1) Factory position.
2) Do not use salt at this level.
6.2 Electronic adjustment
1. Press the on/off button to activate the
appliance.
2. If necessary, do the Reset function.
3. Press and hold Program until the pro-
gramme indicator
flash and the programme indicator
4. Wait until the programme indicator
starts to flash. The programme indica-
tor
French
degrees
39 - 40
35 - 39
32 - 35
28 - 32
23 - 28
18 - 23
12 - 18
7 - 12
< 4
comes on with fixed light.
goes off and the end indicator
continues to flash.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the
Water hardness
mmol/l
(°fH)
> 40 > 4.2
3.9 - 4.2
3.5 - 3.9
3.2 - 3.5
2.8 - 3.2
2.3 - 2.8
1.8 - 2.3
1.2 - 1.8
0.7 - 1.2
< 7 < 0.7
5. Press Program. The end indicator
starts to
6. Press Program again and again to
7. Press the on/off button to deactivate
appliance. Start a programme to re-
move them. Do not use detergent and
do not load the baskets.
Clarke
degrees
> 29
27 - 29
25 - 27
23 - 25
20 - 23
17 - 20
13 - 17
9 - 13
5 - 9
< 5
starts to flash. The intermittent flashing
of the end indicator refers to the cur-
rent set level.
• E.g. 5 flashes + pause + 5 flashes =
level 5.
change the setting. Each time you
press Program the level number in-
creases.
the appliance and to confirm the set-
ting.
ENGLISH 7
Elec-
tronic
adjust-
ment
10
9
8
7
6
1)
5
4
3
2
2)
1