Before First Use - Electrolux EEA71210L User Manual

Table of Contents

Advertisement

Available languages

Available languages

36
www.electrolux.com
How to activate the acoustic
signal for the end of the
programme
Make sure the appliance is in user mode.
1. Press the programme button three
times.
The indicator
2. Wait until the indicator
to flash and the remaining
programme indicators are off.
The indicator
setting:
off.
on.
3. Press the programme button to
change the setting.
4. Press the on/off button to confirm the
setting.
6.6 AirDry
AirDry improves the drying results with
less energy consumption.

7. BEFORE FIRST USE

1. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
starts to flash.
continues
shows the current
is off = The acoustic signal is
is on = The acoustic signal is
During the drying phase, the
door opens automatically
and remains ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
AirDry is automatically activated with all
programmes excluding
applicable).
CAUTION!
If children have access to
the appliance, it is advised to
deactivate AirDry as opening
the door may pose a danger.
How to deactivate the AirDry
Make sure the appliance is in user mode.
1. Press the programme button four
times.
The indicator
starts to flash.
2. Wait until the indicator
to flash and the remaining
programme indicators are off.
The indicator
shows the current
setting:
is off = AirDry is off.
is on = AirDry is on.
3. Press the programme button to
change the setting.
4. Press the on/off button to confirm the
setting.
detergent and do not put dishes in
the baskets.
After starting the programme, the
appliance recharges the resin in the
water softener for up to 5 minutes. The
washing phase starts only after this
procedure is complete. The procedure is
repeated periodically.
(if
continues

Advertisement

Chapters

Table of Contents
loading

Table of Contents