Download  Print this page

Electrolux ESF 2440 Instruction Book

Electrolux dishwasher
Hide thumbs

Advertisement

Advertisement

Table of Contents
loading

  Also See for Electrolux ESF 2440

  Summary of Contents for Electrolux ESF 2440

  • Page 2: Table Of Contents

    Contents For the installer For the user Technical specifications Safety information Unpacking Description of the appliance - Damages - Spray arm - Use - Coarse filter/microfilter - Positioning - Fine filter - Protecting the dishwasher against freezing - Detergent dispenser - Rinse aid dispenser Installation - Water softener...
  • Page 3: Safety Information

    Safety information Before installing and first using the dishwasher, read this instruction booklet carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the dishwasher are thoroughly familiar with its operation and safety features. Save these instructions and make sure they remain with the dishwasher if it is moved or sold, so that everyone using it through its life can be properly informed on appliance use and safety.
  • Page 4: Description Of The Appliance

    Description of the appliance - 4 -...
  • Page 5: Spray Arm

    Spray arm (1) 3. Wipe off any spillage carefully to prevent excessive foaming during the next wash programme. It is important to keep all the holes in the spray arm clear. A clogged hole can seriously affect washing efficiency. 4. Close the lid and press until it locks again. If the spray arm needs cleaning, unscrew the nut anti- Do not fill the rinse aid dispenser with liquid clockwise, remove the washer and lift off the spray arm.
  • Page 6: The Control Panel

    The control panel Indicator and control lamps Display On/Off button Water softener Delay start button button Programme buttons Combination buttons ”A”: In addition to selecting a programme, you can by pressing these two buttons adjust the setting of the water softener and cancel a programme in progress. Control lamps: Indicator lamps: Shows that •...
  • Page 7: Adjusting The Water Softener

    Adjusting the water softener To prevent limescaling on the dishes and to the interior of the Contact your local Water Authority to find the dishwasher, the dishes must be washed with soft water. exact water hardness level for your area. This dishwasher is equipped with a water softener, where tap- The water softener has 5 settings: water which is harder than 4 °d (german degree) is softened.
  • Page 8: Programme Chart

    Programme chart All types of All types of Type of Plates and Coffee cups, dishes dishes dishes cooking pots delicate items • heavily Type of • normaly • normaly • lightly • 4) soiled soil: soiled soiled soiled • dried-on food •...
  • Page 9: Loading And Unloading

    Loadind and unloading the dishwasher How to load the dishes Baskets The illustration shows the dishwasher loaded with six Main basket place settings. Your own dishes are not likely to be Cutlery basket identical to this load, but if you follow the advice below The cup shelves can be placed in two different we are sure you will be pleased with the results.
  • Page 10: Using The Appliance

    Using the appliance Starting the programme Pause function 1. Scrape or rinse off solid food remnants. With the paus function the programme can be temporarily disrupted for a short period of time. 2. Load the dishwasher. (See the basket and loading). 1.
  • Page 11: In The Event Of A Fault

    In the event of a fault Before calling out an engineer, please check through the details below because some faults can be rectified easily without the need to call out an engineer. If an engineer is called to resolve a problem listed below or to repair a fault caused by incorrect installation or mis-use a charge will be made, even if the appliance is under guarantee.
  • Page 12: Service

    In the event of a fault With help of the error code on the display, it’s possible that you can solve the problem your self. When the problem is solved, press in the button for the disrupted programme and the programme continues. For other error codes on the display ( , followed by a numbers): •...
  • Page 13: Information For Test Centres

    Information for test centres The salt container and rinse aid dispenser shall be filled in accordance with this instruction manual. Before conducting the measurements the dishwasher shall be operated for one or two complete cycles using detergent and a clean load. Test standard: EN 50242 and EN 60704 Rated capacity:...
  • Page 14: Unpacking

    Unpacking Damages If the dishwasher has been damaged during transport, you should immediately notify the company responsible for delivering it. Check that the dishwasher is undamaged. If you discover any damage, faults or that anything is missing, you should notify the dealer immediately. Never leave packaging material in a place where children may play with it.
  • Page 15: Installation

    Installation Water inlet The dishwasher is equipped with safety features which are to prevent the water from going back to the fresh water system. These features are ac- cording to current water technical safety regulations. The temperature of the water supply should not exceed 65° C and the pressure should be between 80-1000 kPa (0,8 - 10 bar).
  • Page 16 Technical changes possible...