Contents For the Installer For the User Technical specifications Safety information Unpacking Description of the appliance - Damages - Rinse conditioner dispenser - Use - Spray arm - Building-in - Coarse filter - Protecting the machine against freezing - Fine filter - Detergent dispenser Installation Controls and programme table...
Safety information Before installing and first using the dishwasher, read this instruction booklet carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the dishwasher are thoroughly familiar with its operation and safety features. Save these instructions and make sure they remain with the dishwasher if it is moved or sold, so that everyone using it through its life can be properly informed on appliance use and safety.
Description of the appliance Rinse conditioner dispenser 1 Spray arm 2 Use of a rinse conditioner will result in cleaner and faster It is important to keep all the holes in the spray arm clear. drying of the load, since it helps water to run off. Too A clogged hole can seriously affect washing efficiency.
The control panel and programme table - All figures are nominal and vary for example due to temperature variations on the inlet water. - The figures apply to washing up 5 place settings according to test standard EN 50242. Programme selector/On/off switch Door lock To start the machine turn the selector knob to the Press the handle down and open the door.
Loading How to load the dishes The illustration shows the dishwasher loaded with 5 place settings. Your own dishes are not likely to be identical to this load, but if you follow the advices below we are sure you will be pleased with the result. Always place glasses, cups and bowls upside down.
Using the appliance Starting the programme 1. Scrape or rinse off solid food remnants. 2. Load the dishwasher. (See the basket and loading). Pour detergent into the detergent dispenser, about 1-2 tablespoons for a normal load. 3. Close the door. 4.
In the event of a fault • If water leaks from the machine • Turn off the water supply tap or stopcock immediately and isolate the machine from the electrical supply by removing the plug from the wall socket. • Check that all seals, seams and connections are watertight.
Service Service and spare parts Servicing and repairs must be carried out by a service company authorised by the supplier. Use only spare parts supplied by these. Before calling service, use the trouble shooting table ”In the event of a fault” to try to attend to the fault yourself. If service is called in to solve a problem that is in this list, there is a risk that you will be responsible for the cost.
Unpacking Damages If the dishwasher has been damaged during transport, you should immediately notify the company responsible for delivering it. Check that the dishwasher is undamaged. If you discover any damage, faults or that anything is missing, you should notify the dealer immediately. Never leave packaging material in a place where children may play with it.
Installation Positioning The dishwasher is intended to be installed on a kitchen drainer or worktop. To function properly, make sure that the appliance is level. Its height can be adjusted with the adjustable feets (8 mm each). Water inlet The temperature of the water supply should not exceed 65°...