6.3 Filling the salt container
6.4 Filling the rinse aid dispenser
7. DAILY USE
1. Open the water tap.
2. Press the on/off button to activate the
• If the salt indicator is on, fill the salt
• If the rinse aid indicator is on, fill the
rinse aid dispenser.
Turn the cap counterclockwise and
open the salt container.
Put 1 litre of water in the salt contain-
er (only for the first time).
Fill the salt container with dishwasher
Remove the salt around the opening
of the salt container.
Turn the cap clockwise to close the
Water and salt can come out from
the salt container when you fill it.
Risk of corrosion. To prevent it,
after you fill the salt container,
start a programme.
Press the release button (D) to open
the lid (C).
Fill the rinse aid dispenser (A), no
more than the mark 'max'.
Remove the spilled rinse aid with an
absorbent cloth to prevent too much
Close the lid. Make sure that the re-
lease button locks into position.
You can turn the selector of the
released quantity (B) between po-
sition 1 (lowest quantity) and posi-
tion 6 (highest quantity).
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme
for the type of load and the degree of