Preparing The Image - Roland METAZA MPX-70 User Manual

Hardness of surface
to print
Cross-section of
printing material
Edge of the
material is too
high.

Preparing the Image

Prepare an image (such as a photograph or drawing) for printing.
Data in JPEG or BMP format can be used with Dr. METAZA2.
Vickers hardness (HV) of 200 or less
* Note that materials which may crack or split by printing (such as glass, stone, precious
stones, china, and porcelain) cannot be printed even if hardness is within the preceding range.
Attempting to print such materials may damage the machine.
Flat, with no difference in level
The printed surface must be level when the material is placed on the table.
Surface to print
is not straight.
3-3 Getting Ready to Print
Back surface is Back surface is
curved. uneven.
Chapter 3 Performing Printing 29