Installing And Setting Up The Software; Overview Of The Included Software; System Requirements - Roland METAZA MPX-70 User Manual

2-3 Installing and Setting Up the Software

Overview of the Included Software

The included CD-ROM contains the following software.
Dr. METAZA2
This is a program for printing images on the surface of printing material using this machine. It enables you import and
crop images to print, and perform editing to add text, boxes, and the like.
MPX-70 Head Manager
This is a utility for adjusting the head. Run it when you replace the head or adjust the marking pins.
Windows-based drivers
These are necessary for sending data from Windows to the machine. Be sure to install them.

System Requirements

System Requirements for Installing the Software
Operating system
Computer
Drive
Monitor
Memory (RAM)
Free hard-disk space required for
installation
Interface
System Requirements for USB Connection
Making a USB connection with Windows requires use of a computer that meets all of the following system require-
ments. Please note that other configurations cannot be supported.
Operating system
Computer
20 Chapter 2 Getting Ready to Print
Windows 98 SE (Second Edition)/Me/2000/XP
Computer running Windows (Pentium processor or better recommended)
CD-ROM drive
16-bit color (High Color) video card with a resolution of 800 x 600
64 MB or more recommended
10 MB
USB port
Windows 98 SE (Second Edition)/Me/2000/XP
1) Computers preinstalled with Windows 98 SE/Me/2000/XP at the time of purchase
(This includes such computers later upgraded to Windows Me/2000/XP.)
2) Computers on which USB operation is assured by the manufacturer of computers