Table of Contents
Advertisement
Preparing to Move the Machine
Before moving the machine, dispose of the discharged fluid and secure the print heads in place. Attempt-
ing to move the machine without first performing these preparations may result in damage to internal
components due to leaking ink or damage to the print heads.
IMPORTANT
• Once the preparations for moving the machine are complete, move the machine promptly and turn on the machine
as soon as possible after the machine is relocated. If you leave the machine alone without turning it on, the precipi-
tated ink will coagulate and result in problems such as the clogging of the print heads.
• When moving the machine, keep it at a temperature between 5 and 40°C (41 and 104°F) and at a relative humidity
between 20 and 80% (no condensation). Failure to do so may result in a breakdown.
• Handle the machine with care when moving it, keeping it level (not tilted at an angle) and preventing it from strik-
ing other objects.
Step 1: Removing Media and the Blade Holder
MEMO
The procedure for replacing the blade is displayed on the operation panel, but this section only describes the work for
removing the blade.
Procedure
1.
Remove any media.
If any media has been loaded, remove it.
If no media is loaded, raise the loading lever.
2.
Tap
.
3.
Tap [Maintenance]>[Blade Replacement].
The [Blade Replacement] screen appears.
4.
Tap [Execute].
Operations When Moving the Unit
315
Advertisement
Table of Contents
