Mounting; Orientation; Rigging - Chauvet Colordash Par-Quad 7 User Manual

Setup

Mounting

Orientation

Rigging

Procedure
Product Mounting Diagram
-8-
Before mounting this product, read and follow the
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
The COLORdash™ Par-Quad 7 consists of a double-bracketed yoke and the body of the
product CHAUVET® recommends using the following general guidelines when mounting
this product.
• When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
• Make sure to mount this product away from any flammable material as indicated in
the Safety Notes.
• Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
• If hanging this product, make sure that the mounting location can support the
product's weight. Refer to the
requirements of this product.
• When hanging this product, always secure to a fastening device using a safety cable
(included).
The COLORdash™ Par-Quad 7 comes with a double-bracketed yoke to which you can
either attach mounting clamps for hanging or simply use as a floor stand. You must
supply your own mounting clamps. Make sure the clamps are capable of supporting the
weight of this product. You will have to use at least one mounting point per product.
Floor Mounting
Safety Notes
Technical Specifications
Clamp
Safety Cable
Overhead Mounting
COLORdash™ Par-Quad 7 User Manual Rev. 1
in this manual.
chart for the weight-bearing