Page 2
Chauvet has no obligation to make, and does not commit to make, any such revisions.. The COLORdash S-Par 1 User Manual Rev. 2 is the first edition of this manual. Go to Document www.chauvetprofessional.com...
If the box or the contents (the product and included accessories) appear damaged from shipping or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may invalidate your claim. In addition, keep the box and contents for inspection.
This product contains no user-serviceable parts. Any reference to servicing in this User Manual will only apply to properly trained Chauvet certified technicians. Do not open the housing or attempt any repairs.
Introduction 2. Introduction The COLORdash S-Par 1 is the first of the COLORdash products which appear to have a single Description light source., The high-power RGBA LED engine and homogenizing optic produce an evenly blended color palette with a subtle soft edge. The product is fully convection cooled and uses IP rated power and data connectors for indoor and outdoor use.
Introduction Overview Control Panel Power In Power Out Front View Data In Data Out Rear View Adjustment Knob Double Bracket Yoke Top View Side View COLORdash S-Par 1 User Manual Rev. 2...
Green/Yellow Green/Yellow Green The COLORdash S-Par 1 supports power linking. You can power link up to 24 products at Power Linking 120 V; up to 40 at 208 V; or up to 45 at 230 V. This product comes with a power input cord. Power linking cables are available from Chauvet for purchase.
Setup You can link the COLORdash S-Par 1 to a DMX controller using a 5-pin DMX connection. If DMX Linking using other DMX-compatible products with the COLORdash S-Par 1, you can control each individually with a single DMX controller. The COLORdash S-Par 1 uses a 5-pin DMX data connection for the 5-, 6- and 11-channel DMX personalities.
When hanging this product, always secure to a fastening device using a safety cable. For our CHAUVET Professional line of safety cables, go to http://trusst.com/products/. The COLORdash S-Par 1 comes with a double-bracketed yoke to which you can either attach Procedure mounting clamps for hanging or simply use as a floor stand.
Navigates downward through the menu list or decreases the numeric value when in a function Control Set the COLORdash S-Par 1 starting address in the 001–512 DMX range. This enables control of up to 46 products in the 11-channel 11Ch personality. Options...
Daylight 3 Moving Head White Combine red, green, blue, and amber to make Green Manual 0–255 a custom color Color Mixer Blue (0–100%) Amber Auto Show Auto 1–5 Speed 0–100 Automatic programs -10- COLORdash S-Par 1 User Manual Rev. 2...
Turns off display backlight after 20 sec of inactivity Back Light Turns off display backlight after 30 sec of inactivity Display backlight always on Fixture Hours Shows total product hours Information Version Shows installed software version COLORdash S-Par 1 User Manual Rev. 2 -11-...
The master should be the first product in the daisy chain. White Balance This setting allows for selection of the white balance shown by the COLORdash S-Par 1 when the color setting is RGBA and the DMX controller’s red, green, and blue faders are set to 255.
Back Light COLORdash S-Par 1’s display stays on after the last button is pressed on the control panel. 1. Go to the Back Light main level. 2. Select On (remains on), 10S (10 seconds), 20S (20 seconds), or 30S (seconds).
Strobe 011 ó 255 Slow to fast 4 Ch Channel Function Value Percent/Setting 000 ó 255 0–100% 000 ó 255 0–100% Green 000 ó 255 0–100% Blue 000 ó 255 0–100% Amber COLORdash S-Par 1 User Manual Rev. 2 -15-...
6. Wipe any dirt or grime to the outside edges of the lens surface. 7. Gently polish the lens surfaces until they are free of haze and lint. Always dry the external surfaces thoroughly and carefully after cleaning them. -16- COLORdash S-Par 1 User Manual Rev. 2...
Be prepared to provide the model number, serial number, and a brief description of the cause(s) for the return. Clearly label the package with an RMA number. Chauvet will refuse any product returned without an RMA number. DO NOT write the RMA number directly on the box. Instead, write it on a properly affixed label.
Voice: +52 (728) 285-5000 Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux contact the dealer of record. COLORdash S-Par 1 User Manual Rev. 2...
Need help?
Do you have a question about the COLORDASH S-PAR 1 and is the answer not in the manual?
Questions and answers