Thermostat Maintenance; Limited Warranty; Changing The Batteries - Braeburn 2020NC Detailed Installer Manual

Programmable thermostats single stage heat / cool conventional and heat pump; up to 2 heat / 1 cool conventional and heat pump
Hide thumbs Also See for 2020NC:
Table of Contents

Advertisement

9 Thermostat Maintenance

Changing the Batteries

Depending on your particular installation, this
thermostat may be equipped with two (2) "AA"
type alkaline batteries.
If batteries are installed and they become low,
a low battery indicator will appear in the display.
You should change your batteries immediately
when you see the low battery signal by following
these instructions.
1. Remove thermostat body by gently pulling it from base.
2. Remove old batteries and replace with new batteries.
3. Make sure to correctly position the (+) and (-) symbols.
4. Gently push thermostat body back onto base.
Thermostat Cleaning
Never spray any liquid directly on the thermostat. Using a soft damp cloth
wipe the outer body of the thermostat. Never use any abrasive cleansers to
clean your thermostat.
Store this manual for future reference.

Limited Warranty

When installed by a professional contractor, this product is backed by a 5 year
limited warranty. Limitations apply. For limitations, terms and conditions, you
may obtain a full copy of this warranty:
· Visit us online: www.braeburnonline.com/warranty
· Phone us: 866.268.5599
· Write us: Braeburn Systems LLC
2215 Cornell Avenue
Montgomery, IL 60538
Braeburn Systems LLC
2215 Cornell Avenue • Montgomery, IL 60538
Technical Assistance: www.braeburnonline.com
Call us toll-free: 866-268-5599 (U.S.)
630-844-1968 (Outside the U.S.)
©2012 Braeburn Systems LLC • All Rights Reserved • Made in China • Patents Pending
+
+
®
5
YEAR
LIMITED
WARRANT Y
2020W-100-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

2220nc

Table of Contents