On both TP-330FW units:
The ON LEDs light green indicating that they are receiving power
—and—
The CAT 5 LINK LEDs light green indicating that a CAT 5 link has been
established between the units
Notes:
• You can connect two FireWire devices simultaneously to a TP-330FW,
however, only one device can be active at a time
• There is no need to install the Kramer PT-1FW DV Line Protector on the
STP/UTP as the TP-330FW already contains built-in line protection
• You can connect devices with 1394b (FireWire 800) bilingual interfaces at
speeds of up to 400Mbps. The FireWire cable used must have a bilingual
connector on one side and a 1394a 6-pin connector on the other side
6
Wiring the TP LINE IN/LINE OUT RJ-45 Connectors
Table 2
and
EIA/TIA 568B wiring. When using STP cable, connect/solder the cable shield to
the RJ-45 connector shield.
Wiring the TP LINE IN/LINE OUT RJ-45 Connectors
Figure 3
define the TP RJ-45 wiring that is different to the standard
Table 2: Twisted Pair Cable Wiring
PIN
1
Green/White
2
Green
3
Orange/White
4
Blue
5
Blue/White
6
Orange
7
Brown/White
8
Brown
Figure 3: UTP Connector
Wire Color
PIN
7
8
3
4
5
6
1
2
1
2
3
4 5 78
6
1 2
4
5
78
3 6
7