Download  Print this page

Unpacking; Damages; Use; Positioning - Electrolux ESF 2440 Instruction Book

Hide thumbs




If the dishwasher has been damaged during transport,
you should immediately notify the company responsible
for delivering it.
Check that the dishwasher is undamaged. If you discover
any damage, faults or that anything is missing, you should
notify the dealer immediately.
Never leave packaging material in a place
where children may play with it.
Check that the following accessories are supplied with the
dishwasher when you unpack it:
– Elbow for discharge hose


This dishwasher is designed solely for washing household
utensils suitable for washing in a dishwasher. Using it for
other purposes may damage it and invalidate the guarantee.


The dishwasher is intended to be installed on a kitchen
drainer, worktop or built-in. To function properly, make
sure that the appliance is level. Its height can be adjusted
with the adjustable feets (5 mm each). See the illustration
for built-in measurements.
Protecting the dishwasher against
If the dishwasher is placed in an environment
where the temperature sometimes fall below
0° C, there is a risk that the small amount of
water which remains inside the parts of the
dishwasher will freeze and damage it.
To prevent this you should:
1. Turn off the water supply to the dishwasher.
2. Remove the water inlet and discharge hoses.
The appliance is only to be used and stored indoors
at normal room temperature. The manufacture is
not responsible for any frost damage.
- 14 -



  Also See for Electrolux ESF 2440