The Control Panel; How To Set The Delayed Start - Electrolux ESF 2440 Instruction Book

The control panel

On/Off button
Combination buttons "A":
In addition to selecting a programme, you can by pressing
these two buttons cancel a programme in progress.
Indicator lamps:
Shows current phase of the selected programme.
• Wash cycle in progress
• Rinse in progress
• Drying in progress
The display can show:
• Which start time is set.
• Remaining time of a programme in progress.
• An error code.

How to set the delayed start

The programme start can be delayed between 1 and 19
hours.
1. Press in the On/Off button.
2. Press the delay start button repeatedly, until the
required delay shows on the display. Indicator
lamp for the delay start button is lit.
3. Press the button for the required programme.
4. The remaining time to the start is shown in
the display. After the set delayed start time
has elapsed, the programme starts.
Control lamps:
Shows that • Programme cycle ended
top lamp
middle lamp
lowest lamp
- 6 -
A
Programme
buttons
• Refilling of the rinse aid
dispenser is necessary
Changing the delayed start:
If the programme has not started, you are still able
to change the set time with the delay start button.
Cancelling the delayed start:
If the programme has not started, the delayed start
can be cancelled. Press the delay start button
repeatedly, until the running time of the selected
programme appears on the display. The required
programme starts immediately.
Indicator and
control lamps
Display
Delay start
button