Printer Options; For Mac Os X - Xerox 4112 User Manual

Macintosh computers

Printer options

1. Click Printers on the Print Center menu bar, and select Show Info, or
For Mac OS X v10.3.3, click [Printers] on the Printer Setup Utility menu bar, then select Show
Info.
2. Select Installable Options, and select the options that have been installed on the printer.
See "Printer options" on page 6. for details about the options.
Note
This section describes the Configure dialog in the Chooser and the Printer Specific Options of
the printer driver.

For Mac OS X

1. Click Printers on the Print Center menu bar, and select Show Info.
For Mac OS X v10.3.3, click [Printers] on the Printer Setup Utility menu bar, then select
Show Info.
2. Select Installable Options, and select the options that have been installed on the printer.
Settings:
Hole Puncher Setup
Specify the number of holes to punch on the paper. Select from "2 Holes/4 Holes" or "3 Holes."
High Capacity Feeder
Select "Available" if the High Capacity Feeder has been installed.
Tri-Folding Output Tray
Select "Available" if the Tri-Fold Output Tray is installed.
Booklet Output Tray
Select "Available" if the Booklet Tray is installed.
Memory
The built-in memory is 512MB.
2-6
Xerox 4112/4127 Copier/Printer
PostScript User Guide