Hcs80 Cooling Fan; Unloading The Hcs80 Stacker Tray - Xerox DocuColor 7000AP User Manual

Unloading the HCS80 Stacker Tray

Do c u Co lo r 70 0 0A P /8 0 00 A P U s er G u i de

HCS80 Cooling fan

The HCS80 is equipped with a cooling fan that you
can switch on and off as required. The cooling fan
is located inside the front door:
Only switch on the cooling fan when running paper
that weighs 120 g/m
Remember to switch off the fan after your job(s)
finishes and when running paper that weigh less
than 120 g/m
Use the following procedure to unload the Stacker
Tray when it is full, or to retrieve a completed job.
1.
2.
8 . O p ti o na l A c c es s o r i e s
2
(80 lb.) or greater.
2
(80 lb.).
Press the Unload button on the Stacker
Control Panel. The Wait light blinks until the
Stacker Tray has reached the down position.
Open the front door when the Unload Light
illuminates.
8-3