Jam Clearance With 2-Sided Printing; High Capacity Stacker 80 (Hcs80) - Xerox DocuColor 7000AP User Manual

Jam clearance with 2-sided printing

6

High Capacity Stacker 80 (HCS80)

Do c u Co lo r 70 0 0A P /8 0 00 A P U s er G u i de
When printing 2-Sided output, the UI will direct you
to clear the following areas if a jam occurs.
1.
5
2.
CAUTION:
before removing it from under the lip of this area.
3.
4.
5.
6.
A paper jam in the HCS80 will be indicated by a
message on the digital press UI. Follow the
instructions displayed. The image on the HCS80
Control Panel will flash showing the area where the
jam is located.
4. H ow t o c l ea r J a m s
Open the Right and Left Front Doors when
directed to by a UI message.
Lift handles 5 and 6 and clear any paper in
the areas.
Paper can rip if not pushed back
Push the paper back until you see the front
edge, then remove the paper.
Reposition handles 5 and 6 by closing firmly.
Close the Right and Left Front Doors.
Follow the instructions on the UI to restart
your print job.
4-5