Description Of The Data Format Added To The Weighing Data - A&D GP-61KS Instruction Manual

9-7 Description of the Data Format Added to the Weighing Data

ID number dout 5-id 1
The number to identify a specific balance.
This format consists of seven characters excluding the terminator.
Data number dout d-no 1
This format outputs the data number just before the data is transmitted using the RS-232C interface.
This format consists of six characters excluding the terminator.
When CSV format (5if type 5) is selected, the period ( . ) is replaced with a comma (
Date dout 5-td 2
The date output order can be changed in "Clock (Cl adj)". Outputs the year in four-digit
format.
dout 5-td 1
Time
Outputs time in 24-hour format.
Tare value
When the tare value in memory is recalled, the tare value is output before the weighing data.
Comparison results
By setting "Comparison results (Cp-r)" of the function table to "1", the comparison results can be
added to the data output using the RS-232C serial interface. Use A&D standard format (type 0).
The comparison results are added after the header in A&D standard format as below.
Note
When the data described above is added to the weighing data, the output is in the
following order: ID number, Data number, Date, Time and Weighing data.
3
or
3
or
Tare value
Weighing data (Net value)
45
,
).