Asking For Repair - A&D GP-61KS Instruction Manual

Display
Other errors

18-3 Asking For Repair

If the balance needs service or repair, contact the local A&D dealer.
The balance is a precision instrument. Use much care when handling the balance and observe
the following when transporting the balance.
Use the original packing material.
Remove the weighing pan from the main unit.
Error code Description
Memory type error
Type of memory set in the function table and type of
data stored are different.
For details, refer to "11. DATA MEMORY".
Communications error
EC, E00
A protocol error occurred in communications.
Confirm the format, baud rate and parity.
Undefined command error
EC, E01
An undefined command was received.
Confirm the command.
Not ready
EC, E02
A received command can not be processed.
e.g. The balance received a Q command, but not in the
e.g. The balance received a Q command while
Adjust the delay time to transmit a command.
Timeout error
EC, E03
If the timeout parameter is set to "t-Up1", the balance
did not receive the next character of a command within
the time limit of one second.
Confirm the communication.
Excess characters error
EC, E04
The balance received excessive characters in a command.
Confirm the command.
Format error
EC, E06
A command includes incorrect data.
e.g. The data is numerically incorrect.
Confirm the command.
Parameter setting error
EC, E07
The received data exceeds the range that the balance can accept.
Confirm the parameter range of the command.
If the errors described above can not be released or
other errors are displayed, contact the local A&D dealer.
Other symbol
When this indicator blinks, automatic self calibration is
required. The indicator blinks when the balance detects
changes in ambient temperature. If the balance is not
used for several minutes with this indicator blinking, the
balance performs automatic self calibration. The blinking
period depends on the operating environment.
weighing mode.
processing a RE-ZERO command.
86