Weighing Data Format - A&D GX-1603A Communications Manual

7-2. Weighing data format

As for the balance's weighing data output, for USB it can be changed by the internal setting U-tP
(USB data format) and for RS-232C – by the internal setting
Standard format A&D
□ This is the standard format for sending data to peripheral devices.
□ Consists of 15 characters (excluding the terminator).
□ The condition of the data is indicated with a 2-character header.
□ The data is padded with polarity and zeros (filling the data's higher order's surplus part with
zeros).
□ If the data is zero, the polarity is positive.
□ The unit consists of three characters.
S T , +
Header
When stable
S T
When unstable
U S
Counting mode when stable
Q T
When overloaded
O L
□ Printing pattern of the AD-8127 compact printer is as follows:
WT, +1234.56 g
DP format（Dump print）
□ This format is suitable for dump printing.
□ Consists of 16 characters (excluding the terminator).
□ The condition of the data is indicated with a 2-character header.
□ The polarity sign is added right before the data if the data is not overloaded or zero.
□ The data is zero-suppressed (leading zeros are replaced with spaces).
□ The unit consists of three characters.
W T _ _
Heade
W T When stable
U S When unstable
Q T Counting mode when stable
RS-232C connection：internal setting
USB setting： internal setting
0 0 1 2 3
Data
RS-232C connection： internal setting
USB connection： no function
_ _ + 1 2
Data
GX-A Series/GF-A Series Communication Manual 16 / 41
. 4 5 _ _
Unit
means "space"
_
<CR> is the ASCII:0Dh code
<LF> is the ASCII:0Ah code
3 . 4 5 _
means "space"
_
(data format).
g CR LF
Terminator
_ g CR LF
Unit Terminator