Troubleshooting - Strong SRT 4300 User Manual

Troubleshooting

When you found some problems about this STB, please check the table as
below. Because these may not be any serious problems:
Fault Phenomenon probably reasons
Power on, but no Please carefully check the
display on screen power plug, to see it is in
socket of wall or not? Is
power interrupted?
Power on this STB, Is the aerial install correct?
then that screen
displays
LNB input is not connect
"No signal"
The transmit station turns
off
The sky wave disturbs the
device
The program setups are
incorrect
STB plays a strange Due to the channel contain
sound more audio tracks or audio
languages
USB Game Become The TV color sysem
Black and White setting is not same as STB
TV type
Tips: If you refer to this troubleshooting, but no resolve that problem you
encountered. Please contact the local dealer or technical support instantly,
do not open the machine, because that is very dangerous to you or to the
machine in that cases.
Resolve
Put firmly the power plug to the
socket on
the wall.
Reinstall the aerial and calibrate
it
Connect the LNB
Attempt until the signal coming
again
Attempt again later
Set the proper
parameters of received program
in the system
settings menu
User can use the "Audio"
button on the RCU to select the
correct audio track or audio
languages
Make sure the STB TV system
set to the same system ( PAL;
NTSC; AUTO ) of TV system.
32