S E T U P M O T O; U S A L S S E T U - Strong SRT 4300 User Manual

Installation
and symbol rate value by numeric key, choose the correct Polarization,
Horizontal or Vertical, then save it.
Delete TP
Press yellow button you can delete the channel you do want to view.
2.4 Setup Motor
To set up the auto Satellite Dish (DiSEqC1.2 system) and generate the
positioner system.
Continuously Move
Using the "Vol" buttons to adjust West
and East to move the dish, the signal and
quality bars at the bottom of the screen
judge the best position of the dish.
Step Size
Adjust the Move Step from 1 to 10.
Move steps
Dish move step by step, adjust the dish to
the best position.
Limit set
Using the "Vol" buttons to fix East or West limit or disable limit status.
2.5 USALS Setup
To set up the USALS system onto your STB.
If you have a USALS motorized system, you must set your position (latitude and
longitude) in order to calculate all motor positions for viewable satellites. You
should refer to the motor's manual .
Set the correct value of Longitude and Latitude of your position, press OK key,
then you can see the moving direction and angle to your selected satellite from
Motor menu.
19