Connection - Strong SRT 4300 User Manual

S.T.B Connection
Step 1: Connect to the antenna
Connect the satellite dish lead coming from the wall plate to the LNB INPUT
socket on the SRT 4300(socket1).
Step 2: Choose your Connection
There are a number of methods for connecting the SRT4300, depending on
your preference and the connection types on your TV. These methods are
labeled A, B below.
A: Y / Pb / Pr (Component) using the supplied RCA blue–red–green lead
For Component video, connect with the supplied Y / Pb / Pr Component cable
(green, blue and red leads). Connect the leads to the Y, Pb and Pr sockets on
the SRT4300, and then to the corresponding Component sockets on your TV.
Please pay attention to the color-coding. You will also need to establish a
connection for left and right audio via the audio sockets. This can be done using
the supplied RCA cable.
For right audio, connect the red RCA lead and for left audio, connect the white
RCA lead.
B: CVBS (Composite) using the supplied RCA red–white–yellow lead
Using the appropriate color-coding, you can connect to your TV with the
supplied RCA cable.
For video, connect the yellow RCA lead to the yellow video socket on the
SRT4300 and the corresponding socket on your TV.
For right audio, connect the red RCA lead to the red audio socket on the
SRT4300 and the corresponding socket on your TV.
For left audio, connect the white RCA lead on the SRT4300 and the
corresponding socket on your TV.
Various equipment and TV/VCR can be connected to STB.
This manual will explain common ways to connect to the equipment.
If you experience any problem, please contact your sales agency.
13