Local Conference; Network Conference - Yealink SIP-T21P User Manual

The SIP-T21P IP phone supports up to 3 parties (including yourself) in a conference call.
This is the default method of conference called Local Conference.
To set up a local conference call:
1. Place a call to the first party.
2. When the first party answers the call, press the Conference soft key to place a new
call.
The active call is placed on hold.
3. Enter the number of the second party and press
4. When the second party answers the call, you can consult with him or her before
adding to the conference.
5. Press the Conference soft key again to join all parties in the conference.
To join two calls in a conference:
1. Place two calls using two different accounts on the phone (for example, place the
first call using account 1, and then place the second call using account 2).
2. Press or to select the call for conference and make sure the call is active
(for example, select the call on account 1).
3. Press the Conference soft key to join the two calls in the conference on the selected
account.
You can press the Hold soft key to place the conference on hold. You can press the Split
soft key to split the conference call into two individual calls. To drop the conference call,
press the Cancel soft key.
You can use network conference on the SIP-T21P IP phone to conduct a conference with
multiple participants.
This feature allows you to perform the following:
Join two calls together into a conference call.

Invite another party into an active conference call.

Basic Call Features
, , or the Send soft key.
87