Call Completion - Yealink SIP-T21P User Manual

User Guide for the SIP-T21P IP Phone
1. Press the Ok soft key to activate auto redial.
The following prompt will appear on the LCD screen of the phone:
2. Wait for a period of time or press the Ok soft key to redial the phone number.
The phone will retry as many times as configured until the called party is idle.
You can use call completion to notify the caller who failed to reach a desired callee
when the callee becomes available to receive a call.
To configure call completion via phone user interface:
1. Press Menu->Features->Call Completion.
2. Press
field.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
Call completion is configurable via web user interface at the path Features->General
Information.
To use call completion:
When the called party is busy, the following prompt will appear on the LCD screen of the
phone:
72
or , or the Switch soft key to select Enable from the Call Completion