Auto Redial - Yealink SIP-T21P User Manual

Auto answer is configurable via web user interface at the path Account->Basic.
Note
Auto answer is only applicable when there is no other call in progress on the phone.
You can enable auto redial to redial the phone number automatically when the called
party is busy. You can also configure the times settings for auto redial and the time to
wait between redial attempts.
To configure auto redial via phone user interface:
1. Press Menu->Features->Auto Redial.
2. Press
3. Enter the desired time in the Interval field.
The default time interval is 10s.
4. Enter the desired times in the Times field.
The default times are 10.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Auto redial is configurable via web user interface at the path Features->General
Information.
To use auto redial:
When the called party is busy, the following prompt will appear on the LCD screen of the
phone:
or , or the Switch soft key to select Enable from the Auto Redial field.
Basic Call Features
71