Volvo XC90 Owner's Manual page 256

10 Infotainment system
Radio functions
If there is no station with an adequately
strong signal then the display shows
10
station found
.
Cancelling automatic storage of
stations
– Press EXIT.
Selecting an autostored preset
Allowing the radio to remain in Auto mode
provides access to the autostored presets.
1. Briefly press AUTO (1).
the display.
2. Press one of the 0 - 9 buttons.
3. The radio remains in Auto mode until it is
exited by a brief press on AUTO (1), EXIT
or AM/FM.
Scanning
SCAN (2) automatically searches through a
wavelength for strong stations. When a sta-
tion is found, it is played for approx. 8 sec-
onds before scanning is resumed.
Activating/deactivating Scan
1. Select wavelength using AM/FM.
2. Press SCAN (2) to activate.
appears in the display.
The RDS functions available vary in the different markets.
1
254
3. Close using SCAN or EXIT.
No
Storing a station
A selected station can be stored as a preset
while SCAN is active.
Press one of the 0 - 9 buttons and hold it
–
depressed until the message
stored
SCAN is interrupted and the stored station
can be selected as a preset.
AUTO appears in
RDS functions
RDS (Radio Data System) links FM transmit-
ters into a network. An FM transmitter in such
a network sends information that gives an
RDS radio the following functions:
•
Automatically switches to a stronger
transmitter if reception in the area is poor.
•
Searches for programme form, such as
traffic information or news.
•
Receives text information on the current
radio programme.
NOTE
Some radio stations do not use RDS or
only a selected range of its functions.
SCAN
Station
appears on the display.
1
Volume control – NEWS/TP/ALARM
NOTE
If a CD for example is playing when the
radio receives a traffic bulletin, the CD
player is put in pause mode. The message
is played at the volume selected for that
type of message. Playback of the originally
selected audio source is then resumed at
the previous volume. If volume is adjusted
while the bulletin is played, the new vol-
ume is saved and used for the next bulle-
tin.
News – NEWS
This function interrupts other sound sources,
e.g. CD, when a news broadcast starts.
1. Select radio mode using the SELECTOR
knob or the AM/FM button.
News
2. Select in the menu and press
ENTER.
News
3. appears on the display.
4. Select News again and press ENTER to
News
deactivate the function.
With this function, programmes from RDS
stations that are news-coded will interrupt
other audio sources using the volume setting
for this specific purpose. As soon as the