Volvo XC90 Owner's Manual page 228

09 Maintenance and service
Replacing bulbs
09
8. Screw the cover back into place; the
marking HAUT should be at the top.
Main beam
Halogen headlamps
1. Undo the outer cover by pulling it straight
out and then unplug the connector.
2. Disconnect the spring clamp. First push
to the right so that the spring clamp dis-
connects, then out and down.
3. Pull out the lamp.
4. Fit the new bulb. It can only fit in one
position.
226
5. Press the clamp spring upwards and a lit-
tle to the left so that it secures in its
catch.
6. Press the connector back in place and
refit the cover.
Side marker lamps and position/
parking lamps
The bulbs are housed in bayonet holders.
1. Turn the bulb holder anticlockwise and
remove.
2. Pull the bulb straight out.
3. Fit the new bulb by carefully pressing it
into the recess.
4. Fit the bulb holder back in place and turn
clockwise.
Direction indicators
The bulbs are housed in bayonet holders.
1. Turn the bulb holder anticlockwise and
remove.
2. Press in the bulb, turn anticlockwise and
remove.
3. Fit the new bulb by pressing it into the
recess and then turning clockwise.