Volvo XC90 Owner's Manual page 227

IMPORTANT
Do not pull the electrical cable, only the
connector
5. Unplug the connector by first pressing in
the catch from underneath and then pull-
ing it up a bit from above.
6. Lift out the entire headlamp insert and
place it on a soft surface so as not to
damage the lens.
Refit the headlamp insert in reverse order.
Check that the lock pins are correctly situ-
ated.
Location of bulbs in front lamp
Dipped beam
Main beam
Direction indicators
Parking/position lamps
Side marker lamps
09 Maintenance and service
Replacing bulbs
Dipped beam, halogen
1. Undo the outer cover by turning it anti-
clockwise.
2. Unplug the connector.
3. Disconnect the spring clamp. First push
to the right so that the spring clamp dis-
connects, then out and down.
4. Pull out the lamp.
5. Fit the new bulb. It can only fit in one
position.
6. Press the clamp spring upwards and a lit-
tle to the left so that it secures in its
catch.
7. Press the connector back in place.
09
225