Wireless Headphones Operation; Wireless Headphones Special Features; Wireless Headphones Controls And Indicators; Wireless Headphones Battery Installation - Toyota RSE Owner's Manual

WIRELESS HEADPHONES OPERATION

The system includes built-in infrared transmitters for use with
Wireless Headphones. The passenger side monitor (M1) IR
transmitter transmits on channel 1. The driver side monitor (M2)
IR transmitter transmits on channel 2. A channel select switch
on the headphones allows the user to select the audio from
either the passenger side monitor or the driver side monitor.
Wireless Headphone Special Features
• Automatic level control prevents input signal overloading.
• Uses high frequency infrared light to assure a clean signal for
clear reception.
• Adjustable Headphone Band.
• Dual Channel.
• Auto shutoff after 3.5 minutes of no Audio Signal.
• Fold-fl at ear pieces rotate 90° to facilitate storing in seat back
pocket or door pocket.
Wireless Headphone Controls and Indicators
1. Infrared Pickup Sensors
2. Battery Cover
3. Volume Control
4. Power Button (Push ON/OFF)
5. Power Indicator
6. Channel Select Switch
Figure 2. Wireless Headphones Controls and Indicators
Wireless Headphone Battery Installation
1. Remove the Battery Cover (Figure 3).
2. Place two alkaline AAA batteries into the battery
compartment of each headphone. Make sure that the
battery polarity is correct.
3. Replace the Battery Cover.
Figure 3. Replacing the Headphone Batteries
- 10 -