MISC SETUP
Select "Misc" using the
to enter the Misc menu. Select an option using the
button, then touch the
Use Default Settings
This option allows the user to reset all options to the factory
default settings.
Note: This function will not aff ect the Rating control settings.
or
icon, then touch the
OK icon.
Screen Saver
This option allows the user to set the Screen Saver mode.
icon
or
ON
- Screen saver will appear.
OFF
- Screen saver will not appear.
Note: The DVD player will enter Screen Saver mode if a monitor
is inactive for approximately 2 minutes.
Align Screen
This option allows the user to align the touch screen. Select
"Align Screen" and touch the
select "YES". Touch the
alignment symbols (+) on the panel's four corners. Once the
four symbols have been touched, the unit will display "SCREEN
ALIGN OK" or "INVALID ALIGNMENT". If the alignment is invalid,
repeat the procedure until the prompt "SCREEN ALIGN OK" is
displayed. After the alignment, the new record will overwrite
the old one.
- 22 -
OK icon. Use the
OK icon. Touch each of the panel
icon to